NT Stair Operation Guide
1. Choose layout: Start the "NT straight staircase" or "NT curved staircase" as needed.
2. Enter dimensions: Set the floor height, stair width, number of steps, and step thickness in the parameter box.
3. Choose Style: Select the appropriate stair structure configuration.
4. Generate and check: Specify the starting point/direction or pick the inner arc to generate stairs, check the clearance and adjust as needed.
Common uses
Residential stairs, commercial transportation spaces, geometric shapes of stairs used for indoor performance, and comparison of stair styles and sizes during the design phase.
Be careful with old versions! Shows the old version for reference and testing purposes, you should use the latest version.
-
Version1.1.0
(简体中文)
Install
-
Release date: 2026-11-19 19:15
File size: 6.27 KB
-
OS: Windows
Mac
Applicable version: 26
25
24
23
22
21
20
19
18
17
16
15
14
13
8
7
6
- 更新日志:
[2026.11.19] 首发 v1.1.0,界面全面汉化;提供直楼梯、弧形楼梯与设置三个命令。
- Plugin Information
- Ratings:
-
0
- Plugin Category
- Building Facility
- Uploader:
-
zfjoy520
- Release date:
- 2026-11-19 19:14
- Update date:
- 2026-11-20 16:49
- current version:
- 1.1.0
- Command numbers:
- 3
- File size:
- 6.27 KB
- Introduction
-
Generate straight and curved stairs based on project dimensions.
Establishing step by step tread and kick surfaces is time-consuming and makes subsequent size modifications difficult. The NT staircase converts the main building parameters into a regular geometric shape of the staircase group.
Stair modeling requires precise handling of the relationship between floor height, number of steps, tread depth, flight width, and structural support. NT staircase helps architects, interior designers, and students quickly generate neat staircase geometry from these key parameters, supporting both straight and curved processes, providing practical styles suitable for conceptual modeling, design deepening, and reporting.
Straight staircase
Generate neat straight stairs according to building dimensions.
Curved staircase
Quickly generate curved stair geometry along the horizontal inner arc.
Kick face control
Define the floor height and number of steps to form consistent vertical traffic.
Tread control
Set reasonable tread size and leading edge for the established layout.
Structural Style
Provide practical structural configurations such as enclosed stair treads, suspended steps, wall brackets, and enclosed kickboards.
NT Stair Straight(NT Stair Straight)
Click on the starting point and drag to determine the direction to generate a straight staircase that supports multiple tread styles.
NT Stair Radial Curved(NT Stair Radial Curved)
Select the horizontal inner edge arc and generate an arc-shaped staircase along the arc.
NT Stair Settings(NT Stair Settings)
Set default parameters such as floor height, stair width, level, thickness, and style.
-
Developer: Nice Tower Visit the developer's site>
- Version1.1.0New command
- 更新日志:
[2026.11.19] 首发 v1.1.0,界面全面汉化;提供直楼梯、弧形楼梯与设置三个命令。
- Comment
-
No comment!
-