NT Cutting Operation Guide
1. Prepare cutting face: Create or prepare a face in the current editing environment that defines the trimming boundary.
2. Target selection: First select the entity or non entity group/component to be cut.
3. Run NT cutting: After starting the command, click on the cutting surface, confirm that the green boundary is retained, and then press Enter or double-click to perform trimming.
4. Inspection results: Check the incision and clean the auxiliary cutting surface as needed.
Common uses
Trimming of walls/beams/columns under sloping roofs, custom cutting of cabinet panels, shaping of beams and columns at nodes, removal of excess lines and decorative components.
Be careful with old versions! Shows the old version for reference and testing purposes, you should use the latest version.
-
Version1.0.0
(简体中文)
Install
-
Release date: 2026-11-19 19:17
File size: 4.24 KB
-
OS: Windows
Mac
Applicable version: 26
25
24
23
22
21
20
19
18
17
16
15
14
13
8
7
6
- 更新日志:
[2026.11.19] 首发 v1.0.0,界面全面汉化;提供保留内部修剪命令。
- Plugin Information
- Ratings:
-
0
- Plugin Category
- Line/Face
- Uploader:
-
zfjoy520
- Release date:
- 2026-11-19 19:17
- Update date:
- 2026-11-20 16:49
- current version:
- 1.0.0
- Command numbers:
- 1
- File size:
- 4.24 KB
- Introduction
-
Trim solid and non solid geometry cleanly with the face as the cutting boundary.
The process of manually interleaving and deleting models often leaves excess edges that need to be carefully cleaned. NT cutting uses the selected surface as the cutting boundary to directly cut unnecessary parts from solid or non solid objects.
Architectural and interior models often require cutting objects into roofs, walls, panels, or custom slopes. NT cutting allows designers to define incisions and process selected geometries using surfaces, without the need to build complex Boolean settings. It is suitable for beams, profiles, cabinets, and structural components.
Surface based pruning
Use SketchUp faces as intuitive cutting boundaries.
Supporting entities
Accurately trim effective closed entity groups and components.
Support non entity
It can also handle groups or component geometries of imperfect entities.
A more concise process
Reduce manual model interleaving, selection and deletion cleaning operations.
Building cutting
Easily handle actual project geometries such as slopes and custom boundaries.
NT Trim Keep Inside(NT Trim Keep Inside)
Select the cutting surface and box the target object, preserving the geometry on one side of the green boundary.
-
Developer: Nice Tower Visit the developer's site>
- Version1.0.0New command
- 更新日志:
[2026.11.19] 首发 v1.0.0,界面全面汉化;提供保留内部修剪命令。
- Comment
-
No comment!
-