The real bend plug-in bends a group or component instance to a specified degree and retains the original length of the reference segment. The current reference segment is the position in front of the bottom of the bounding box. Because the bend is performed at the edge of the bounding box in front of the bottom, make sure that the axis of the instance is in the same direction as the bend.True bend default along group, group

Through groups and components, any edge, line, face, curve and surface in the model can be copied to the original position separately, and it is in the selected state for the next operation.

The view alignment direction can be automatically recognized according to the viewing angle position of the current model, and then rotated into an orthographic view (front view, left view, right view, back view, top view);You can also select an aligned face or boundary in the current model to rotate the view, or you can lock the current view angle;By changing

Object object alignment tool supports line, face, group, component and section alignment.You can align several groups and components along the face, axis, or left, middle, and right of the component box.When aligning, shift to align to a line, face, or section, and Ctrl to copy a new object....

You can copy groups / components along a specified path.Advantages:1. Preview array results;2. The path can be any continuous line such as curve, broken line, or even spatial curve, closed curve, and does not need to be welded in advance;3. You can change the array spacing, array number, and alignment;Make...

Multi faceted single path lofting, path following enhanced version, can follow the path in batches.It can loft (path following) multiple separate faces at one time, which makes up for the defect that the path following can only loft one side.See http://www.sketchupbar.com/thread-111454-1-1.html for details

You can color the faces with the specified number of sides in the selection set to distinguish the triangular faces, the four sided faces and the multilateral faces.In the skin model and some special cases, it can play the role of screening different surfaces.

You can make a direct closed connection between two lines in the plane, or you can extend the selected two lines to the intersection.

The model conversion drawing plug-in can automatically generate top view, bottom view, left view, right view, front view, back view, top section view, bottom section view, left section view, right section view, front section view, back section view, southwest axonometric drawing, northwest axonometric drawing, Southeast axonometric drawing, northeast axis, etc. for groups or components in SketchUp

BIM modeling plug-in is a simple BIM modeling tool package on SketchUp. First, create and draw the grid and floor elevation, and then use the drawing tools of wall, column, beam, foundation, floor and opening for more precise modeling operations.With tolerance and snap options in snap settings, you can provide