Modify the model by changing the edge length of the model and the distance between the two edges.Two uses:1. Click edge line, enter length2. Drag two sidelines, enter distance

Adjust and organize the terrain with slope, its characteristics are that it can display the elevation of each vertex and the slope of each face in real time; it can directly click the point, line or face to set its elevation; it can match the slope of the two selected faces; it can also generate the slope direction line and slope. ...

By scanning all the contents displayed on the screen, recognize the positive and negative faces of all the faces of the camera, and automatically flip the back.Three modes are optional (high / normal / medium), the higher the accuracy of scanning pixels, and the longer the scanning time; and vice versa. ...

The simplified contour plug-in is very suitable for dealing with overly complex contours imported from DWG files.The contour (line) is optimized by inputting the angle value. The continuous line segment smaller than the input angle can be optimized into a line, and the processed continuous line can also be welded. ...

Create a scene page for each individual group or component selected.Note: do not enter the component or group to operate this command on nested groups or components.

Select a group or component and a face at the same time. After executing the command, the group or component can be automatically stretched to the position of the face in the z-axis direction.

Combine the functions of moving, rotating and scaling to edit components and groups with an intuitive scale.Tips:1. Press the handle, drag the mouse, there is a scale for reference.2. You can double-click the joystick to enter data through the dialog box. ...

This command can generate spiral curve along the curve path, flexibly set multiple options, and generate circular pipe at the same time.

SketchUp also has the sculpting function of ZBrush. With each brush, you can edit mesh surfaces, sculpt rich geometric shapes or undulating terrain surfaces.

Subdivision is a common method to deal with geometric modeling in modeling. Starting from the initial control grid, according to some rules, recursively generate new points to gradually encrypt the control grid. With the subdivision going on, the control mesh is polished gradually, and finally the smooth curves or surfaces interpolated or approximated by discrete points are generated. ...